Field Strength Meter for EMF exposure
SMP3
Field Strength Meter
3 INSTRUMENTS IN 1
DC Field measurements
Spectrum Analysis – FFT up to 10 MHz
Broadband measurements up to 60 GHz
WEIGHTED PEAK METHOD (WPM)
Real-time comparison in % with the selected limits up to 10 MHz
ONE SINGLE METER FOR ALL PROBES
Isotropic and high accuracy probes
Electric and Magnetic field
Probe auto-detect capability
ASSESSMENTS ACCORDING TO INTERNATIONAL STANDARDS
EU Directive 2013/35, ICNIRP, IEC, EN, IEEE, SC6, etc.
All limits embedded in a single meter
USB AND FIBER OPTIC COMMUNICATION
PC software included
Data download, automatic reporting, and remote control
FIRMWARE UPGRADE
Easy and fast install to upgrade capabilities
Discover our Field Meter Probes
E & H (1 Hz - 400 kHz)
WP50. WP400, WP400c, WP400-3
E (100 kHz - 60 GHz)
WPF3, WPF6, WPF8, WPF18, WPF40, WPF60, WPF60S
H (300 kHz – 1000 MHz)
WPH60, WPH1000
H (DC - 40 kHz)
WPH-DC
3-IN-1 FIELD METER
The only device that offers genuine 3-in-1 functionalities: broadband measurements (DC to 60 GHz), frequency spectrum analysis (DC to 400 kHz) and static field measurements.
The SMP3 field meter provides the most advanced features and technology on the market, designed for users who need high-quality measurements, ease of use and good reporting tools.
STANDARDS IEC, EN, IEEE, ITU, ICNIRP
International standards and recommendations for the assessment of electromagnetic exposure.
EUROPEAN DIRECTIVE 2013/35/EU
Protection for workers against exposure to electromagnetic fields. Compliance with EN standards.
FCC / OSHA SAFETY CODE 6
American and Canadian regulations for human exposure to electromagnetic fields.
SMP3 FIELD METER FEATURES
-
3-in-1 Field Meter: spectrum analysis (DC – 400 kHz), broadband (DC - 60 GHz) and static field measurements.
-
Real-time FFT-based spectrum analysis using digital processing.
-
Weighted Peak Method (WPM) for automatic and real time comparison with limits.
-
Special auto-gain function for peak detection (indispensable for procedures such as welding).
-
Display of results in RMS and peak values.
-
Function for time domain measurement of a specific frequency.
-
Automatic field probe recognition.
-
E&H field selection.
-
Total field value and value for each component (X, Y, Z).
-
Frequency SPAN selection.
-
High Pass Filters at 1 Hz, 10 Hz, 25 Hz and 100 Hz.
-
Max-hold function.
-
Display of maximum, minimum and average values.
-
Sliding window function according to standards.
-
Spatial average function.
-
Adjustable measurement time from 1s to 100 hours.
-
Programmable measurement to start at a given time.
-
Graphic display of broadband measurement changes over time.
-
Adjustable graph display from 1 s to 12 minutes.
-
Programmable alarm function.
-
USB and fibre optics connection.
-
Large storage capacity.
-
Screen-shot function for reporting.
-
PC software for control and reporting.
-
Results can be uploaded automatically to a web-page control centre.
-
Available in several languages.
Axis selection
Frequency and level cursor
FFT Analysis - Filter Selection
Axis selection
FIELD METER PC SOFTWARE
Exceptional PC software for equipment management, data downloads and report generation.
Measurement data (results + GPS positioning) can be uploaded automatically to a web-page control centre, supplied optionally by Wavecontrol.
DATA DOWNLOAD AND GOOGLE MAPS POSITIONING
PRINT-OUTS, TABLES AND DYNAMIC GRAPHICS
REPORT GENERATION INCLUDING SCREENSHOTS
FIRMWARE UPDATES
FIELD METER REMOTE CONTROL
